BCPMSCE30S - BCPM power monitoring advanced + ethernet – 30 split core CT 50 A

BCPMSCE30S

BCPM power monitoring advanced + ethernet – 30 split core CT 50 A

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM monitors both the 30 branch circuits and mains values, incoming power and energy. All to provide information on the complete Power Distribution Unit. Adapter boards with terminals for split-core CTs can be mounted using DIN-rail, Snaptrack or on a common mounting plate with the main board Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with serial connection for either Modbus RTU or BACnet MS/TP, and an Ethernet connection for Modbus TCP, BACnet IP and SNMP. The meter need to be powered by a 100V AC to 277V AC supply source. Include 50A branch CTs with 2 meters leads and 1.8 meters round ribbon cables, for 30 split-core current transformers. The device dimensions are 353mm in width, 253mm in height, 71mm in depth and weight 1.5 kilograms.

Add to Quote Catalogue

Specifications

Part Number	BCPMSCE30S
Availability	N
Lead Time	15
UNSPSC	41113630
Prop 65	This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov
Discount Schedule	PL1
Return Indicator	No
Height	5.75 inch
Width	11.34 inch
Weight	3.31 pound

Characteristics

Range	PowerLogic
Product Name	PowerLogic BCPMSC
Product Or Component Type	Multi-circuit energy meter
Device Short Name	BCPMSCE
Model Type	Advanced + ethernet
Power Monitoring	Basic instrumentation
Energy Management	Sub billing and cost allocation
Device Application	Sub billing
Power Quality Analysis	voltage sag and swell detection
Type Of Measurement	Voltage Current Frequency Active power Power factor Active energy
[Us] Rated Supply Voltage	90...277 V AC 50/60 Hz +/- 1 %
Network Frequency	50 Hz 60 Hz
Current Transformer Input	30 split core CT 0.333 V
Update Time	1.8 s
Measurement Voltage	90…277 V phase to neutral 150…480 V phase to phase
Measurement Accuracy	Branch current 2 % 0.25…2 A Branch current 1 % 2…100 A Mains current 3 % 1…100 % Mains current 3 % 2…100 % Voltage 1 % 90…277 V
Sampling Rate	256 samples/cycle
Provided Equipment	2 x cables 2 x adapter board 30 x current transformer
Communication Port Protocol	Modbus RTU BACnet IP BACnet MS/TP Modbus TCP SNMP v2
Communication Port Support	RS485 Ethernet
Communication Of Data	Low current alarm Over voltage alarm High current alarm Low-low current alarm High-high current alarm Under voltage alarm
Mounting Mode	Fixed
Mounting Support	Chassis
Relative Humidity	0…95 % 32…140 °F (0…60 °C)
Ambient Air Temp For Storage	-40…158 °F (-40…70 °C)
Operating Altitude	9842.52 ft (3000 m)
Standards	ANSI C12.1 UL 508 EN 61010 IEC 61036
Product Certifications	UL
Width	11.34 in (288 mm)
Height	5.75 in (146 mm)
Product Weight	3.31 lb(US) (1.5 kg)
Category	09793 - PLOGIC BRANCH CIRCUIT BCPM & MCM
Discount Schedule	PL1
Nbr. Of Units In Pkg.	1
EU RoHs Directive	Compliant
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

BCPM power monitoring advanced + ethernet – 30 split core CT 50 A

Specifications

Characteristics

Documents

Royal Wholesale Electric