ATV212HD11N4 - variable speed drive, Altivar 212, 11kW, 15hp, 480V, 3 phases, with EMC, IP21

ATV212HD11N4

variable speed drive, Altivar 212, 11kW, 15hp, 480V, 3 phases, with EMC, IP21

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 6.45kg and its dimensions are, 180mm wide, 232mm high, 170mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet. It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Product Destination	asynchronous motors
Range Of Product	Altivar 212
Product Or Component Type	variable speed drive
Ip Degree Of Protection	IP21
Motor Power Kw	11 kW
Phase	3 phase
Line Current	16.8 A 480 V 21.1 A 380 V
[Us] Rated Supply Voltage	380...480 V - 15...10 %
Communication Port Protocol	METASYS N2 APOGEE FLN LonWorks BACnet Modbus
Supply Voltage Limits	323-528 V
Product Specific Application	pumps and fans in HVAC
Emc Filter	Class C2 EMC filter integrated
Maximum Horse Power Rating	15 hp
Device Short Name	ATV212
Supply Frequency	50...60 Hz - 5...5 %
Warranty	18 months
Prospective Line Isc	22 kA
Electrical Connection	VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5-2.5 mm² / AWG 14 L1/R, L2/S, L3/T terminal 16-16 mm² / AWG 6
Network Frequency	47.5...63 Hz
Discrete Input Logic	positive logic (source) F, R, RES), <= 5 V, >= 11 V negative logic (sink) F, R, RES), >= 16 V, <= 10 V
Type Of Cable	without mounting kit 1 IEC cable 45 °C, copper 90 °C / XLPE/EPR without mounting kit 1 IEC cable 45 °C, copper 70 °C / PVC with UL Type 1 kit 3 UL 508 cable 40 °C, copper 75 °C / PVC
Height	232 mm
Acceleration And Deceleration Ramps	automatic based on the load linear adjustable separately from 0.01 to 3200 s
Analogue Output Type	FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits FM switch-configurable current 0...20 mA 970 Ohm 10 bits
Speed Drive Output Frequency	0.5-200 Hz
Discrete Output Type	configurable relay logic FLA, FLC) NO - 100000 cycles configurable relay logic FLB, FLC) NC - 100000 cycles configurable relay logic RY, RC) NO - 100000 cycles
Transmission Frame	RTU
Torque Accuracy	+/- 15 %
Asynchronous Motor Control Profile	voltage/frequency ratio, 2 points voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) flux vector control without sensor, standard voltage/frequency ratio - Energy Saving, quadratic U/f voltage/frequency ratio, 5 points
Maximum Switching Current	5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
Communication Service	read holding registers (03) 2 words maximum time out setting from 0.1 to 100 s write single register (06) monitoring inhibitable write multiple registers (16) 2 words maximum read device identification (43)
Transient Overtorque	120-120 % of nominal motor torque +/- 10 % 60 s
Insulation Resistance	>= 1 mOhm 500 V DC for 1 minute
Response Time	FM 2 ms +/- 0.5 ms analog FLA, FLC 7 ms +/- 0.5 ms discrete FLB, FLC 7 ms +/- 0.5 ms discrete RY, RC 7 ms +/- 0.5 ms discrete
Data Format	8 bits, 1 stop, odd even or no configurable parity
Apparent Power	17.1 kVA 380 V
Dielectric Strength	3535 V DC between earth and power terminals 5092 V DC between control and power terminals
Power Range	7-11 kW 380-440 V 3 phase 7-11 kW 480-500 V 3 phase
Net Weight	6.45 kg
Type Of Polarization	no impedance
Frequency Resolution	display unit 0.1 Hz analog input 0.024/50 Hz
Accuracy	+/- 0.6 % VIA) for a temperature variation 60 °C +/- 0.6 % VIB) for a temperature variation 60 °C +/- 1 % FM) for a temperature variation 60 °C
Switching Frequency	6...16 kHz adjustable 12...16 kHz with derating factor
Maximum Transient Current	24.8 A 60 s
Connector Type	1 open style 1 RJ45
Analogue Input Number	2
Functionality	mid
Motor Slip Compensation	not available in voltage/frequency ratio motor control adjustable automatic whatever the load
Motor Starter Type	variable speed drive
Discrete Output Number	2
Minimum Switching Current	3 mA 24 V DC configurable relay logic
Analogue Output Number	1
Physical Interface	2-wire RS 485
Power Dissipation In W	430 W
Continuous Output Current	22.5 A 380 V 22.5 A 460 V
Number Of Addresses	1-247
Tightening Torque	0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 2.5 N.m, 22 lb.in L1/R, L2/S, L3/T)
Discrete Input Type	F programmable 24 V DC level 1 PLC 4700 Ohm R programmable 24 V DC level 1 PLC 4700 Ohm RES programmable 24 V DC level 1 PLC 4700 Ohm
Speed Range	1-10
Isolation	electrical between power and control
Local Signalling	for DC bus energized 1 LED (red)
Linearity Error	VIA +/- 0.15 % of maximum value input VIB +/- 0.15 % of maximum value input FM +/- 0.2 % output
Specific Application	HVAC
Output Voltage	<= power supply voltage
Nominal Switching Frequency	12 kHz
Width	180 mm
Transmission Rate	9600 bps or 19200 bps
Braking To Standstill	by DC injection
Air Flow	147 m3/h
Depth	170 mm
Protection Type	overheating protection drive line supply undervoltage drive against input phase loss drive thermal protection motor motor phase break motor with PTC probes motor thermal power stage drive short-circuit between motor phases drive input phase breaks drive overcurrent between output phases and earth drive overvoltages on the DC bus drive break on the control circuit drive against exceeding limit speed drive line supply overvoltage and undervoltage drive
Supply	internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection internal supply 24 V DC 21-27 V), <200 A overload and short-circuit protection
Analogue Input Type	VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bits
Discrete And Process Manufacturing	building - HVAC compressor for scroll building - HVAC fan building - HVAC pump
Sampling Duration	2 ms +/- 0.5 ms F discrete 2 ms +/- 0.5 ms R discrete 2 ms +/- 0.5 ms RES discrete 3.5 ms +/- 0.5 ms VIA analog 22 ms +/- 0.5 ms VIB analog
Speed Accuracy	+/- 10 % of nominal slip 0.2 Tn to Tn
Option Card	communication card LonWorks
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP110204EN
Sustainable Offer Status	Green Premium product
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Circularity Profile	ENVEOLI1102030EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications	C-tick NOM 117 CSA UL
Standards	EN 61800-3 category C2 EN 61800-3 environments 1 category C2 IEC 61800-3 category C3 EN 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C3 UL Type 1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C3 EN 61800-3 environments 2 category C3 EN 61800-3 environments 2 category C2 EN 61800-3 IEC 61800-3 category C2 EN 61800-3 environments 1 category C1 EN 61800-5-1 EN 55011 class A group 1 IEC 61800-3 environments 2 category C2 EN 61800-3 category C3 IEC 61800-5-1 EN 61800-3 environments 2 category C1 IEC 61800-3 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C1
Electromagnetic Compatibility	electrostatic discharge immunity test level 3 IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 electrical fast transient/burst immunity test level 4 IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 conducted radio-frequency immunity test level 3 IEC 61000-4-6 voltage dips and interruptions immunity test IEC 61000-4-11
Ambient Air Temperature For Operation	-10-40 °C without derating) 40-50 °C with derating factor)
Shock Resistance	15 gn 11 ms IEC 60068-2-27
Environmental Characteristic	classes 3C1 IEC 60721-3-3 classes 3S2 IEC 60721-3-3
Marking	CE
Vibration Resistance	1.5 mm 3-13 Hz)EN/IEC 60068-2-6 1 gn 13-200 Hz)EN/IEC 60068-2-8
Noise Level	51 dB 86/188/EEC
Pollution Degree	2 IEC 61800-5-1
Regulation Loop	adjustable PI regulator
Ambient Air Temperature For Storage	-25-70 °C
Relative Humidity	5-95 % without condensation IEC 60068-2-3 5-95 % without dripping water IEC 60068-2-3
Assembly Style	with heat sink
Ip Degree Of Protection	IP20 on upper part without blanking plate on cover EN/IEC 61800-5-1 IP20 on upper part without blanking plate on cover EN/IEC 60529 IP21 EN/IEC 61800-5-1 IP21 EN/IEC 60529 IP41 on upper part EN/IEC 61800-5-1 IP41 on upper part EN/IEC 60529
Operating Altitude	3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating
Operating Position	vertical +/- 10 degree

variable speed drive, Altivar 212, 11kW, 15hp, 480V, 3 phases, with EMC, IP21

Specifications

Documents

Royal Wholesale Electric