Classic Foil/Braid Design Thermoset Low Smoke Zero Halogen, 16 to 2 AWG • Bronze Braid Armor • Double Thermoset Jackets

Features:

LowSmoke Zero Halogen (LSZH) jacketed, Type P insulations
300% ground for enhanced system reliability and human Approximately 300% of 1 full-sized conductor in ground potential copper
Finely stranded tinned copper conductors for ease of cable installation, high frequency performance, vibration, corrosion and heat resistance
Low capacitance XLP insulation protects motor by reducing magnitude of reflected wave
Foil/Braid shielding enables noise control, improves common mode current containment and prevents capacitive coupling

Certifications/Compliance:

ABS(American Bureau of Shipping)
DNV(Det Norske Veritas)*
IEEE 45 Electrical Installation on Shipboard
IEEE 1580 Type P insulations IEEE recommended practice for use on shipboard in fixed of floating facilities
UL 1309 marine shipboard cables
IEC 60811-2-1 Hydrocarbon Resistant
IEC 60754-1,-2 (acid gas emissions)
600V UL 1277 Type TC-ER
1000V UL Flexible Motor Supply
IEEE 1202/383, CSA FT4 Flame Tests
IEC 60332-3-22 Cat A Flame Test
-40°C Cold Bend
RHW-2/XHHW-2Rated Conductors (16 AWG XHHW-2 only)
90°C Wet/Dry
Oil Res II
Sunlight Resistant

Construction:

16 to 2 AWG – Three Finely-Stranded Tinned Copper (TC) Circuit Conductors with XLP Insulation
One Full-Sized Green/Yellow XLP Insulated Ground (Same AWG as CircuitConductors)
One Full-Sized, Tinned, Uninsulated Ground/Drain
OverallDuofoil® Shield + 85% TC Braid
LSZHThermoset Jacket

Get a Quote Download Spec Sheet PDF

Part No.	Conductor		Pulling Tension (Max)	Bend Radius (Min)		OD (Nom)		Jacket Thickness		Outer Jacket Thickness
	AWG	Stranding	Lbs	Inch	mm	Inch	mm	Lbs	mm	Inch	mm