83040211
SPD for analog signals terminal block format, 4 protected wires, 24 V, 10 kA.
STS PLC is the series of surge protection devices for digital signals and in particular for programmable logic controllers. The range offers a number of voltages and number of protected lines for a variety of applications as well as a terminal block ultra-slim format. These are protectors for a final step of very fine protection to be installed as close as possible to particularly sensitive equipment connected to these communications lines. Meets the IEC 61643-21 standard.
Brand: Surge-Trap®
Add to QuoteSpecifications
| Item Number | 83040211 |
|---|---|
| EAN UPC Code | 8435297863595 |
| GTIN Sell Pack | 38435297863596 |
| Applications |
|
| Approvals Standards |
|
| Brand Name | Mersen |
| Country Of Origin | ES |
| Degree Of Protection Ip | IP20 |
| Features Benefits |
|
| Max Operating Temp | 85 °C |
| Min Operating Temp | -40 °C |
| Product Line | Surge-Trap® Signal - STS PLC |
| Product Brand | Surge-Trap® |
| Product Family | Surge Protection |
| Product Group | Signal Line SPD |
| Support Brand | Cirprotec |
| Wire Type | 0.5 ... 2.5 mm² |
| Housing Material | PA66 |
| Indication System | 0 |
| Product Height | 3.54 in |
| Product Length | 3.9 in |
| Product Weight | 0.152 lb |
| Product Width | 0.31 in |
| Response Time | 1 ns |
| Sell Pack Description | Box |
| Sell Pack Height | 4.17 in |
| Sell Pack Length | 3.15 in |
| Sell Pack Width | 1.77 in |
| Sell Pack Quantity | 1 Each |
| Sell Pack Weight | 0.156 lb |
| Bandwidth | 2 MHz |
| Catalogue No | STS-PLC-30V-4W1 |
| Item Description | STS-PLC-30V-4W1 |
| Max Discharge Current Imax 8 20 | 5kA |
| Nominal Discharge Current | 5kA |
| Nominal Operating Volt Rating Un | 24 V |
| Number Of Wires | 4 Wires |
| Order Multiple | 1 |
| Rated Current Load Il | 0.5 A |
| Short Description | SPD for analog signals terminal block format, 4 protected wires, 24 V, 10 kA. |
| Suitable For Outdoor Use | 0 |
| UCPV | 24 V |
| Wire Connections | Spring terminal |
| Suitable For Outdoor Use | 0 |
