Features & Benefits |
- This steel separation plate separates bayed enclosures while maintaining the IP rating, creating individual spaces for components to be mounted.
- Feature: zinc plated steel separation plate for mild steel combinable floor standing enclosures
- Advantage: the plate can be mounted easily between two bayed enclosures providing segregation; protection degree IP 43 tested, when mounted with the separation plate gasket, SPDG
- Benefit: the enclosure assembly can be easily segregated creating individual spaces for components to be mounted
- Benefit: these areas are commonly used to group component types, for example power in one section and control in another
- Benefit: these spaces can also be used when some components are more sensitive to temperature than others, allowing better control of the enclosure's thermal management
- Comment: separation brackets, CCJ, are required in order to mount the separation plate; if the separation plate is mounted within an enclosure assembly, the internal corner baying kit, CCM, and external baying brackets, CCI, should be used
- Mounting the separation gasket, SPDG, will increase the protection degree on either side of the plate to IP 43; the separation plate cannot be mounted within stainless steel enclosures
- Mounting requirements: IP 43, TYPE 1 sealing can be obtained by using SPDG gasket and CCJ brackets are required to mount the SPD into the enclosures
- Mounting requirements: to bay enclosures together, use CCM and CCI brackets. For EMI shielding the SPDEG gasket must be used
|