Electrical distributor of high quality products to the LA and Orange County markets

Call Us Today To get a Quote
(714) 835-6211
sales@royalsantaana.com
Home > Hoffman > Industrial > Industrial Enclosure Accessories > Internal Mounting for Industrial Enclosures > ProLine G2 Full Mounting Subpanel, 1800×1600, Conductive
ProLine G2 Full Mounting Subpanel, 1800×1600, Conductive
P2P1816G
ProLine G2 Full Mounting Subpanel, 1800×1600, Conductive

The ProLine G2 Subpanel is part of the new patent pending EZ-Load Mounting System which was designed to maximize space utilization and to make loading the subpanel faster and safer by providing a variety of loading options. The EZ-Load Glide Blocks can be used to load a subpanel vertically from the front, rear or side. Additionally, they can be used to load the subpanel horizontally—a new method for a more controlled option to load a subpanel into a modular enclosure.

Brand: nVent HOFFMAN

Add to Quote
Specifications
Catalog Number P2P1816G
GTIN 00783510324148
Tariff Number 9403908041
Bulletin Code P40
Brand nVent HOFFMAN
Features & Benefits
  • Accommodates five loading options: vertical front, vertical side, vertical rear, horizontal front (frame over subpanel), horizontal rear (subpanel lowered into frame)
  • High space efficiency ratio (HxW of subpanel)/(HxW of frame) of 84 percent
  • Mounting subpanel is securely fastened at the top and bottom of the enclosure; subpanels less than 1200mm wide include four sets of EZ-Load Glide Blocks, four BV-M6 fasteners (block to frame) and four M12 Hex Bolts (subpanel to block); Subpanels 1200mm and greater include eight sets of EZ Load Glide Blocks, eight BV-M6 fasteners (block to frame) and eight M12 Hex Bolts (subpanel to block) to ensure wider subpanels are well supported
  • Subpanels greater than 1000mm wide are 10 gauge (3.0 mm) mild steel, while subpanels 100mm or narrower are 12 gauge (2.5mm); conductive or white painted finish available
  • Subpanels can be mounted at any depth in 25-mm increments (front to back); accommodates back-to-back and fully recessed rear positions
  • Side-mount panels must be used for the sides of the enclosure; they can be installed on the interior sides of frames
  • Optional panel support bracket available for applications requiring more support in the center of the subpanel; this is required if the enclosure will be tipped in transit or if the panel is not located at the bottom of the enclosure on the glide blocks
Product Attributes
Country of Origin US
Type Galvanized
Fits Frame (H x W) 1800x1600 mm
Color Unpainted
Finish Galvanized
Material Mild Steel
Thickness (T) 10
Thickness (T) 3.4 mm
Documents
Royal Wholesale Electric

5.0

Powered by

Based on 2 User Reviews

© ROYAL WHOLESALE ELECTRIC - All Rights Reserved 2020