Crouse-Hinds series N2RS non-metallic enclosed switches are used in a rigid metallic conduit or cable system for surface mounting adjacent to or remote from equipment being controlled. Also used for individual motor control, when controlling motor, lighting and other circuits, and to prevent arcing internal to the enclosed switch from causing ignition of a specific hazardous atmosphere, or atmospheres.

Eaton Crouse-Hinds series N2RS enclosed switch, 60A, With three-pole switch, Non-fused, 15 HP/30 HP/40 HP, Krydon fiberglass-reinforced polyester, Three-phase, 1-1/2″, Factory sealed motor circuit switch, 240-600 Vac”

• Enclosed devices are unfused, factory sealed motor circuit switches
• Exceeds NEC wiring end room requirements for ease of installation
• RSWP factory sealed industrial control switch; no external seals are required
• Enclosure is made of Krydon high impact strength fiberglass-reinforced polyester material, having excellent corrosion resistance and stability to heat
• Krydon hubs with integral bushings, for dead end or through feed arrangements, are supplied
• Krydon mounting feet supplied
• Suitable for wash down and corrosive areas (Type 4X)
• A padlock can be used to lock the operating handle in the "OFF"" position
• Rotary actuator with snap action
• Unitized, strong and durable construction provides longer service life for equipment
• Factory sealed 10A, 600 VAC auxiliary contact switch provided"

Brand: Eaton

Add to Quote