Crouse-Hinds series pull elbows are installed in conduit systems to make 90° bends in rigid or IMC conduit systems where space is limited, or to connect rigid or IMC conduit to a box or enclosure. Pull elbows also act as outlets, with removable covers that provide access to conductors for maintenance and future system changes. Condulet tees are installed in concealed conduit runs, allowing a single conduit stub-up to outlet boxes located above or below the main conduit run, eliminating separate feed and return conduits to a flush floor box or junction box.

Eaton Crouse-Hinds series pull elbow, Rigid/IMC, Gender end 1: female, Gender end 2: female, Malleable iron, 90°, 1/2″, Rigid to rigid (female to female)”

• Elbows:
• Tees:
• Compact size, small radius of bend for use in concealed or open conduit systems; particularly suited for use in shallow floors or partitions
• Maximum volume for bends within a compact overall size
• Taper tapped hubs and integral bushing for standard threaded conduit
• Easily removable cover
• Cover openings on an angle, permitting conductors to be pulled straight through either hub

Brand: Eaton

Add to Quote